Valvesonly is the best Gate Valve Manufacturers Canada. A gate valve is a type of valve used to control the flow of fluid through a pipe by either fully opening or fully closing the passageway. Its structure consists of a gate or wedge-shaped disk that moves up and down perpendicular to the flow of the fluid. This gate is housed within a body which contains an inlet and an outlet. The body of the valve is typically made of cast iron, cast steel, or stainless steel, and it is designed to withstand high pressure and temperature conditions. The gate itself is usually made of materials such as stainless steel, brass, or bronze, depending on the application and the properties required for the specific fluid being controlled.
The working principle of a gate valve involves raising or lowering the gate to either allow or block the flow of fluid. When the valve is in the closed position, the gate seals against the valve seat, preventing the fluid from passing through. Conversely, when the valve is open, the gate is lifted completely out of the flow path, allowing fluid to flow freely through the valve. This operation is typically achieved by turning a handwheel or actuator attached to a threaded stem, which raises or lowers the gate. Gate valves are well-suited for applications where a tight seal is required and where the flow needs to be completely shut off or opened fully, rather than being regulated incrementally. However, they are not ideal for throttling applications due to their design, which can cause erosion of the gate and seat if used for partial opening/closing frequently.
Parts:
• Body
• Gate
• Stem
• Bonnet
• Valve Seat
• Packing
• Yoke
• Handwheel or Actuator
Types:
• Solid Wedge Gate Valve
• Parallel Disk or Split Gate Valve
• Flexible Wedge Gate Valve
• Non-Rising and Rising Gate Valve
• Cryogenic Gate Valve
• Through Conduit Gate Valve
• Knife Gate Valve
• Double-disc Valve
• Bellows Seal Gate Valve
As one of the best Gate Valve Manufacturers Canada, we also supply to many industries like:
• Oil and Gas
• Petrochemical
• Chemical
• Water and Wastewater Treatment
• Power Generation
• Mining
• Marine
• Pulp and Paper
• Construction
• Manufacturing
• Utilities
Advantages:
• Full flow control
• Tight shut-off
• Bi-directional flow
• Suitable for high-pressure and high-temperature applications
• These valves are versatile and can be used with a wide range of fluids, including liquids, gases, and slurries, making them suitable for diverse industrial applications.
• Minimal pressure drop
• Gate valves are relatively simple in construction, making them easy to disassemble, inspect, and maintain.
• They are typically constructed from durable materials such as cast iron, cast steel, or stainless steel, making them resistant to corrosion, erosion, and wear, even in harsh operating environments.
• These valves can be operated manually using a handwheel or lever, or they can be equipped with actuators for automated operation, providing flexibility and convenience in controlling fluid flow.
• They are cost-effective solutions for flow control in various industrial applications, offering reliable performance, long service life, and low maintenance requirements compared to other types of valves.
Detailed Description:
• Materials: Ductile Iron, SS306, SS904, SS316, Monel, Bronze, Aluminum Bronze, Brass, Inconel, Incoloy, Duplex steel, Titanium, CF8, CF8M, CF3, CF3M, WC1, Cast iron, Carbon steel (WCB, WCC, WC6, LCB, LF2, WC9).
• Size: 1/2″- 64”.
• Class: 150 to 2500.
• Nominal Pressure: PN10 to PN450.
• Operations: Hand Wheel, Gear operated, Electric, and Pneumatic, Actuated.
• Ends: Flanged, Buttweld, Socket weld, Threaded.
• Standards: API607, DIN, BS, ANSI, ASME, API6D, AWWA.
Visit us: https://valvesonly.com/product-category/api-gate-valve/
Our Address:
100 King St W suite 5600, Toronto, ON M5X 1C9, Canada
