How to install a wooden bed?

The process of installing a wooden bed can be roughly divided into the following steps:

Prepare materials: Make sure you have all the necessary materials, including boards , screws, nuts, welding parts, and installation tools such as power drills, screwdrivers, woodworking files, wood glue, etc.
Check and assemble the head and end of the bed: First, check that all parts are complete, and then assemble the head and end of the bed. Install the screw holes on the board itself at the head of the bed and the end of the bed, arrange the bed leg plate and the horizontal plate according to the requirements, put the eccentric wheel, align the screw holes on the side of the horizontal plate, and then align the screw holes on the side of the horizontal plate with the screw holes at the leg of the bed, insert the large screw connecting rod to tighten and fix.
Assembly frame: After the head of the bed and the end of the bed are assembled, stand it up, and use three-in-one screws to fix the bed respectively at the head of the bed and the end of the bed. Then install the support rod and the support leg, place the support leg in the mounting hole, and fix and tighten it with screws. Place the support clip against the mounting hole at the head of the bed or the end of the bed and tighten it with screws.
Install the bed plate: lay the bed plates one by one on the bedroom bed support frame, and pay attention to the laying distance between the bed plates to maintain uniformity. Insert the screw into the screw hole of the bed plate and tighten the screw with an electric drill.
Detail adjustment: After the installation of the wooden bed, the wooden bed should be adjusted to ensure its safety and stability. This may include adjusting the height of the bed, making sure all connections are secure, etc.
Complete installation: The final load test is carried out to ensure that the bed can safely withstand the intended use weight.
With the above steps, you can complete the installation of the wooden bed. Each step requires careful handling to ensure that all connections are secure to avoid safety issues during use.